Install iAtkos S3 Snow Leopard [TUTORIAL]

This is the tutorial for installing iAtkos S3 Snow Leopard for Intel Processor. The specification during this tutorial were:

1. Board : Asus P5GZ-MX
2. Processor : Core 2 Duo 6320 1.4 GHz
3. Memory : 4 GB
4. HDD : Seagate 160 GB ATA & Seagate 500 GB SATA
5. Graphics Card : nVidia Geforce 9400 GT
6. Sound & Network : ALC 883 and Marvell Yukon 88E8001 (Onboard)
7. Modem : Sierra 885
8. Monitor : BenQ G922HD

Installation

• Put in your iATKOS S3 DVD to your DVD drive and boot it from DVD [Do not forget choose boot primary for DVD in your BIOS].
• After the installation menu appear within your screen, follow the instruction.
• The first thing is to create the partition for iATKOS S3. It is found in the Utility menu [at the top of your screen] then choose Disk Utility.
• Generate partition from there, name it Systems or iAtkos S3.
• After that, choose the partition that you want to install iAtkos S3.
• Click continue and then the most important thing if you want to avoid kernel panic after installation is shown below [picture]:

By choosing all the selections, then click "Done” tab  and “Install”

You need to wait around 20-30 minutes for the iAtkos S3 installation.

Last but not least, now you get the Snow Leopard installed within your PC.